English | 39News Bulletin with Timeout SettingIt switches automatically when a news bulletinstarts even if the radio isn’t being listened to. Also,the time interval when interrupt is prohibited canbe set.Display and Setting"News : OFF""News : 00min"…"News : 90min"When "News : 00min" — "News : 90min" is set,the News Bulletin Interrupt function is ON.When the news bulletin starts, "News" isdisplayed, and it switches to the news bulletin.• If you choose the "News : 20min" setting, further newsbulletins will not be received for 20 minutes once thefirst news bulletin is received.• The news bulletin volume is the same level that wasset for (page 25).In Tuner modeLocal SeekOnly stations whose reception is good aresearched for in auto seek tuning.Display Setting"Local Seek : OFF" The local seek function is OFF."Local Seek : ON" The local seek function is ON.In Tuner modeTuning ModeSets the tuning mode.Tuning mode Display OperationAuto seek "Seek Mode : Auto1" Automatic search for astation.Preset station seek "Seek Mode : Auto2" Search in order of thestations in the Presetmemory.Manual "Seek Mode : Manual" Normal manual tuningcontrol.AF (Alternative Frequency)When poor reception is experienced,automatically switch to another frequencybroadcasting the same program in the same RDSnetwork with better reception.Display Setting"AF : ON" The AF function is ON."AF : OFF" The AF function is OFF.When the AF function is ON, the "RDS" indicatoris ON.• When no other stations with stronger reception areavailable for the same program in the RDS network,you may hear the incoming broadcast in bits andsnatches. Turn OFF the AF function in such a case.When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to theunit.1 Select AMP Control modePush the Control knob to [FM] or [AM].Select the "AMP Control" display.2 Enter AMP Control modePress the Control knob for at least 1 second.3 Select the AMP Control item for adjustmentPush the Contol knob to [FM] or [AM].• For the details of the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPush the Control knob to [4] or [¢].5 Exit AMP Control modePress the [MENU] button.• You cannot use the LX AMP operation during standbymode.• This function is only available if the desired stationsends PTY-code for news bulletin or belongs to-Network sending PTY-code for news bulletin.• When the News Bulletin Interrupt function is ON, itswitches to an FM station.
