Kenwood TM-D710A (K type) Instruction Manual

Also see for RC-D710: Instruction manual Instruction manual Brochure Brochure

Contents

DTMF-2■ Transmitting Stored DTMF Codes1 Press and hold the microphone [PTT].2 While transmitting, press the Tuning control.• The last called DTMF Memory channel name andnumber appear on the display. If no name has beensaved for the channel, the DTMF code appears.3 While still transmitting, rotate the Tuning control toselect your desired DTMF Memory channel, thenpress the Tuning control to set the channel.• Additionally, you can press a DTMF keycorresponding to your desired channel ([0] ~ [9]) toselect the channel and begin transmission.• The stored DTMF code scrolls across the display andis transmitted.• The code will be transmitted even if you release [PTT]before the entire code has scrolled across the display.• If no DTMF code is stored in the selected channel, thefrequency display is restored.■ Selecting a Transmit SpeedSome repeaters may not respond correctly if a DTMFcode is transmitted at fast speed. If this happens,change the DTMF code transmission speed from FAST(default) to SLOW.1 Enter Menu mode and access Menu 302.2 Set the speed to FAST or SLOW.■ Selecting a Pause DurationYou can change the pause duration stored in DTMFMemory channels; the default is 500 msec.1 Enter Menu mode and access Menu 303.2 Select a speed (in msec) from the available list: 100/250/ 500/ 750/ 1000/ 1500/ 2000.DTMF KEY LOCKThis function will lock the DTMF transmission keys so thatthey will not transmit if they are accidentally pressed. Tolock the DTMF keys, turn this function ON.1 Enter Menu mode and access Menu 304.2 Set the key lock to ON or OFF.