Kenwood TM-D710A (K type) Instruction Manual

Also see for RC-D710: Instruction manual Instruction manual Brochure Brochure

Contents

REPEATER-2■ Selecting a Tone FrequencyTo select the tone frequency required to access yourdesired repeater:1 Turn the Tone function ON.2 Press [F], [T.SEL].• The current tone frequency appears on the display.The default frequency is 88.5 Hz.3 Rotate the Tuning control to select your desiredfrequency.• To exit the tone frequency selection, press [ESC].4 Press any key other than the Tuning control and[ESC] to set the selected frequency.Note: If you have set up a Memory channel with a tone setting,simply recall the Memory channel instead of setting up the tonefrequency every time.No. Frequency(Hz) No. Frequency(Hz) No. Frequency(Hz)01 67.0 16 110.9 31 186.202 69.3 17 114.8 32 192.803 71.9 18 118.8 33 203.504 74.4 19 123.0 34 206.505 77.0 20 127.3 35 210.706 79.7 21 131.8 36 218.107 82.5 22 136.5 37 225.708 85.4 23 141.3 38 229.109 88.5 24 146.2 39 233.610 91.5 25 151.4 40 241.811 94.8 26 156.7 41 250.312 97.4 27 162.2 42 254.113 100.0 28 167.914 103.5 29 173.815 107.2 30 179.9■ Automatic Repeater Offset (K and E Types Only)This function automatically selects an offset directionand activates the Tone function, according to thefrequency that you have selected. To obtain an up-to-date band plan for repeater offset direction, contactyour national Amateur Radio association.1 Enter Menu mode and access Menu 401.2 Set the ARO to ON.3 Press [BAND SEL A] to select the A band.4 Press [VFO] to select VFO mode.5 Rotate the Tuning control to select your desiredfrequency.6 Press [PTT] to start a call.• You will be transmitting on an offset frequency valuedetermined from your offset setting value and anoffset direction depending on your selected frequency.Refer to the settings below for offset directions:K Type:Under 145.100 MHz: No offset (Simplexoperation)145.100 ~ 145.499 MHz: Minus (–) offset145.500 ~ 145.599 MHz: No offset (Simplexoperation)146.000 ~ 146.399 MHz: Plus (+) offset146.400 ~ 146.599 MHz: No offset (Simplexoperation)146.600 ~ 146.999 MHz: Minus (–) offset147.000 ~ 147.399 MHz: Plus (+) offset147.400 ~ 147.599 MHz: No offset (Simplexoperation)147.600 ~ 147.999 MHz: Minus (–) offset148.000 MHz and higher: No offset (Simplexoperation)E Type:Under 145.000 MHz: No offset (Simplexoperation)145.600 ~ 145.799 MHz: Minus (–) offset145.800 MHz and higher: No offset (Simplexoperation)