Kenwood TS-140S Instruction Manual

Also see for TS-140S: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4-4-5. Memory Channel RecallFixed channel type recall is possible when using theVFO/M key to recall Memory Channel information.The stored frequency cannot be changed.The following procedure shows how to recall a chan-nel.1. During VFO operation, press the VFO/M key toinitiate Memory Channel operation. This causesthe Memory Channel to return to the status(mode, and frequency) prior to the Memory Chan-nel operation.Example:When 14.175 MHz is stored in Memory Channel03.. Select a Memory Channel by using the M.CH/VFOCH control, or SPLIT key.Example:When Memory Channel 08selected.(28.800 MHz) is3.uss. M.CHeecébhaedadIf you press the VFO/M key again, the originalVFO operating information will be restored.4-4-6. Checking highest and lowest operating fre-quenciesThe highest and lowest operating frequencies storedin Channels 20 to 30 can be checked by the follow-ing method.1.2a:. Press the BAND DOWN switch.5.During VFO operation, press the VFO/M key to in-itiate Memory Channel operation.. Select the desired Memory Channel by using theM. CH/VFO CH control.Press the BAND UP switch.To return to normal VFO operations press theVFO/M key.4-4-7. Clearing a Memory ChannelTo erase a specific Memory Channel:i2:Press and hold the CLEAR key for approximately1.5 seconds.Transfer data from an empty Memory Channel tothe Memory Channel you wish to clear. (Pleaserefer to Section 4-4-10 for additionalinformation.)4-4-8. Memory Channel ScrollThe following procedure provides a method to checka Memory Channel Frequency without changing or24loosing the current receive frequency.12.4-4-9. Transferring Memory.DuringMemoryChanneloperation,press theVFO/MkeytochangetoselectVFOoperation.Press theM.IN keyoncetoinitiateMemoryScroll.TheM.SCRindicatorlights,andtheMemoryChannelFrequencyisdisplayed.(Althoughthedisplayedfrequencywillchange,actualreceptionwillbeatthepreviousfrequency(thatis,thefre-quencybeforetheM.INkeyispressed)oftheVFO.).SelectaMemoryChannelusingtheM.CH/VFOCHcontrol.The frequencystoredintheMemoryChannelwillbe displayed..ToclearMemoryScrolloperation,press theCLEARkeyortheM.IN keyagaintorestoreMemoryChanneloperation.Information to theVFO.Thefollowingproceduretransfers thecontentsoftheMemoryChanneltotheVFO.1:IntheVFOmode,press theVFO/Mkeyto settheMemoryChannelmode.ThisreturnstheMemoryChanneltothe status(mode,and frequency)priortotheVFOoperation.Totransfer thememorycontentstoaVFOwhichisnotcurrentlyoperating,press theA/Bkeybefore pressingtheVFO/Mkey,inordertoswitchtothe desiredVFO.Example:When14.175MHzisstoredinMemoryChannel03.usp M.CH7 f ES ab fy Ghd.epee Y of i GG2. Select the desired Memory Channel by using theM.CH/VFO CH control, or SPLIT key.Example:Memory Channel 06 containing 21.225 MHz isselected.uss. M.CH- J'r77 7(eee RoW3. Press the M m V key. The contents of the MemoryChannel will be transferred to the VFO and opera-tion changes to the VFO mode.If you transfer the contents of one of the Split Fre-quency Memory Channels to the VFO, thetransceiver will automatically select the SPLITmode.Notes:1. When the M » V key is pressed, the contentsof the VFO are cleared but the contents of theMemory Channel will not be cleared.2.If nothing is stored in the selected MemoryChannel, only the channel number is displayed;no transfer is carried out.