Kenwood TS-140S Instruction Manual

Also see for TS-140S: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Specifications ae TS-1408 TS-G508Circuitry Double conversion superheterodyneFrequency range 500 kHz to 30 MHz ae ivis SasIntermediate frequency 1st: 40.055 MHz, 2nd: 455 kHz500 kHz to 1.6 MHz Less than 3.98 pVLSB, USB, CW 1.6 MHz to 21.5 MHz Less than 0.25 pV(at 10 dB S+N/N) 21.5 MHz to 30 MHz Less than 0.25 pV | Less than 0.18 pV «250 MHz to 54 MHz Less than 0.16 pV «2ee 500 kHz to 1.6 MHz Less than 39.8 pVSensitivity Ash 1.6 MHz to 21.5 MHz Less than 2.5 nV(at 10 dB S+N/N) 21.5 MHz to 30 MHz Less than 2.5 yV | Less than 1.78 pV +2re 50 MHz to 54 MHz Less than 1.58 pV «22 FM 21.5 MHz to 30 MHz | Less than 0.35 »V_| Less than 0.18 pV +2& (at 12 dB SINAD) | 50 MHz to 54 MHz — Less than 0.18 pV +2LSB, USB, CW —6 dB: 2.2 kHz, —60 dB: 4.4 kHzSelectivity AM —6 dB: 6 kHz, —50 GB: 18 kHzFM —6 dB: 12 kHz, —50 dB: 25 kHzImage ratio More than 50 dB1st IF rejection More than 50 dBIF SHIFT variable range More than +1.2 kHz10 Hz STEP More than +1.2 kHzRIT variable range 20 Hz STEP More than +2.5 kHzSquelch sensitivity (FM) Less than 0.32 pVOutput 1.5 W across 8 ohms load (10% distortion)Output load impedance 8 ~ 16 ohmsNotes:1. *1: The output power on the 160 m band is limitted to 10 W depending on local regulations.2. *2: This is valuable when the RF AMP switch is turned ON.3. Circuit and ratings are subject to change without notice due to advancements in technology.2-2. ACCESSORIESUnpack your TS-140S/680S carefully and confirm that it is supplied with the following accessories.Dynamic microphone (Except European and U.K. version) .DIN plug (7-pin).......DIN plug (13-pin).....DC power cable assemblyCalibration cableFuse (20A)Instruction manual.....-E30-2065-05 .T91-0352-05....E31-2154-05....FO5-2036-05....B50-8199-XX ... copyWarranty Card itis str atean sa Peete Reah ok pine nas can den seo sasacaacenad paged sc asdesnasasatsdgnadesve edo centiesaeuaasbeeeenets ss sales ea.After unpackingShipping container:Save the boxes and packing in the event your unit needs to be transported for remote operation, maintenance, orservice.