Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

10 EN PreparationsSetting up the systemConnecting Ethernet cableConnecting wireless LANETHERNET ETHERNETModemPC:Windows XP Professional SP1,Windows XP Home Edition SP1,Windows 2000 Professional SP4 or after.ToInternetEthernet cableEthernet cableBroadbandrouterWireless broadband routerPC:Windows XP Professional SP1,Windows XP Home Edition SP1,Windows 2000 Professional SP4 or after.ModemWireless Ethernet bridge÷ This unit is not provided with the Internet connection facility.÷ When this unit is connected to a PC, FM broadcast reception may be interfered with noise. In this case, try the following remedial actions.1. Increase the distance between this unit and the PC.2. When the provided FM indoor antenna is in use, replace it with the FM outdoor antenna. &3. Replace the Ethernet cable with a shielded cable.Connect the wireless Ethernet bridge to the ETHERNET jack on the rearpanel.To AC wall outletToInternetEthernet cable Ethernet cableModular cableEthernet cableModular cableWhen not using a broadband router or hub, connect this unit directly tothe PC using a cross Ethernet cable. In this case, it is required to set theIP address and subnet mask manually. ªEthernet cable* ** Please refer to the instruction manual of your router or hub. Depending on your router or hab they may in rare case not work witha cross Ethernet cable.