Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

20 EN PreparationsExample: Setting with the “NET SERVER” input1Use the INPUT SELECTOR key (or the Network Server key) toselect “NET SERVER”.When performing the speaker setup by selecting the“TUNER”, “DVD”, “VIDEO1”, “VIDEO2”, “GAME” or “F.AUX”input, press the SETUP (or Setup) key and start the proce-dure from step 3. In these cases, the setting information isdisplayed on the display of this unit.When the “NET SERVER” input is selected, the OSD function on theTV screen is activated and detection of the server starts.SEARCHING2Use the MULTI CONTROL @/ #(or the Multi @/ #keys) toselect “SETUP”, and press the ENTER (or the Enter key) .SETUP RETRYWARNINGCould not detect server.Please chek following item.1. Starting server2. Starting PC application3. Install PC application4. Network connection & setting3Use the MULTI CONTROL %/ fi(or the Multi %/ fikeys) to select“Receiver Setup”, and press the ENTER (or the Enter key).Receiver SetupNetwork SetupExitNET LINK PC SERVER1 Setup MenuUse the MULTI CONTROL @/ # (or the Multi @/ # keys)for the following displays.RRSL SWBSLSCSpeakerSetupSpeakerLevelSpeakerDistanceAssainment LEF Level GameFunction ExitRSEPCEEAIKVEERRSSEETTUUPP1 “Speaker Setup”: Select a speaker system. ¡2 “Speaker Level”: Adjust the speaker volume level. £3 “Speaker Distance”: Input the distance to the speakers. £4 “Assignment”: Re-assignment of rear panel jacks ∞5 “LFE Level”: Adjust the LFE LEVEL (Low Frequency Effectslevel) ¢6 “Game Function”: Set up the GAME jacks on the frontpanel. ¢7 “Exit”: Select “Exit” and press the ENTER (or theEnter key) to return to the previous display.÷ While the main setup screen is displayed, the setup mode canbe canceled by pressing the SETUP key (or the Setup key).PreparationTurn on the power to this receiver by pressing thePOWER ON/STANDBY (For U.S.A. and Canada) or theON/STANDBY (For Europe and Australia) key (or thePOWER RCVR key on the remote).Preparing for playbackON/STANDBYPOWER ON/STANDBYSETUPMULTI CONTROL%/fi/@/#SetupPOWER RCVR Multi %/fi/@/#ENTEREnterReturnSpeaker settingsTo enable you to obtain optimum enjoyment from the receiver’s listeningmodes, make sure to complete the speaker settings (subwoofer, front,center, surround and surround back speakers) as described below.Indicates the direction of movement inthe hierarchy when the ENTER (or theEnter key) is pressed.Indicates the direction of MULTI CONTROL (or Multi key) tobe pressed for selecting the setting.Continued to next pageInput selector