Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

33 ENReceiver OperationsRecordingAnalog sources1 Use the INPUT SELECTOR key (or the input selector key)to select the source (other than "VIDEO 1") you want torecord.2 Put the component connected to the VIDEO 1 jacks to therecord-pause mode.3 Start playback, then start recording.÷ Recording may not be normal for some video software. Thisis due to the copy guard condition.Digital sourcesSwitch on the REC MODE to record a digital input source.When the digital mode changes during recording in the REC MODE, theaudio signal may be interrupted momentarily.Recording music in REC modeWhen a multi-channel source such as the Dolby Digital or DTS input signal isrecorded in REC mode, the multi channel signal in the current surround modecan be recorded down-mixed to 2-channel.INPUT SELECTORSETUP1 Use the INPUT SELECTOR key (or the Input Selectorkeys) to select the source ("DVD", "VIDEO 2", "AUX","GAME" or "NET SERVER") you want to record.2 Put the component connected to the VIDEO 1 jacks to therecord-pause mode.3 Press and hold the SETUP key on the main unit formore than 2 seconds to select the "REC MODE".1 REC mode off2 "REC MODE": REC mode onMulti-channel digital signals (DTS or DolbyDigital) are down-mixed to 2-channelbefore being output from the analogrecording (REC OUT) jacks.DSVtDe r e oV O LD I G-I7T5AdLB↓DSVtDe r e oV ORLE C-M7O5DdEBThe display switches automatically.4 Start playback, then start recording.INPUT SELECTOR