Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

17 ENPreparationsANTENNAAMGNDFM 75 ΩSetting up the systemConnecting the antennasAM loop antennaThe supplied loop antenna is for use indoors. Place it as far as possiblefrom the receiver, TV set, speaker cords and power cord, and adjust thedirection for best reception.AM antenna terminal connections1 Push lever. 2 Insert cord. 3 Release lever.FM antenna terminal connectionsInsert the connectorFM indoor antennaThe supplied indoor antenna is for temporary use only. For stable signalreception we recommend using an outdoor antenna. Disconnect theindoor antenna when you connect one outdoors.FM outdoor antennaLead the 75Ω coaxial cable connected to the FM outdoor antenna into theroom and connect it to the FM 75Ω terminal.AM loop antennaFM outdoor antennaUse an antennaadaptor(Commerciallyavailable)Attach to the standBlackWhitePreparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.¶ Insert two AA-size (R6) batteries as indicated by the polar-ity markings.Remote control operationWhen the STANDBY indicator is lit, the power turns ON when you pressthe POWER RCVR on the remote control. When the power comes ON,press the key you want to operate.¶ When pressing more than one remote control key successively,press the keys securely by leaving an interval of 1 second or morebetween keys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.The remote control unit is designed so that the setup codes stored init are saved even after the batteries are removed for replacement.3. Placing the remote sensor in direct sunlight, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.Operating othercomponent rangeRemote sensorPOWER RCVR(For the U.S.A. and Canada) (For Europe and Australia)For the U.S.A. and CanadaThe broadcast reception cannot be made unless the antennas areconnected. Connect the antennas correctly as instructed below.FM indoor antennaFor Europe and AustraliaFM indoor antennaAntenna adaptor