Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

31 ENReceiver OperationsListening with headphonesPHONESDUAL SOURCE VOLUME 5/∞DUAL SOURCE INPUTDUAL SOURCE ON/OFFVOLUME CONTROL1 Connect headphones to the PHONES jack.2 Use the VOLUME CONTROL knob (or the VOL +/– keys)to adjust the volume.Playing difference sources through speakers andheadphones (DUAL SOURCE function)While you enjoy audio listening through the speakers, another personcan enjoy another source (audio + video) through headphones byconnecting the source to the GAME or FRONT AUX jacks.1 Connect headphones to the PHONES jack.2 Press the DUAL SOURCE ON/OFF key to switch the DUALSOURCE function ON.÷ When the DUAL SOURCE function is ON, the video and head-phone outputs reproduce only the second input source of theDUAL SOURCE function.At this time, the audio from the main source, which is selectedwith the input selector, continues to be monitored through thespeakers.Switching the DUAL SOURCE function OFF restores the maininput source signals to the video and headphone outputs.3 Press the DUAL SOURCE INPUT key to select the secondinput source for the DUAL SOURCE function.1 "DUAL SOURCE GAME" :The "GAME" input is selected as the second input source forthe DUAL SOURCE function.2 "DUAL SOURCE F. AUX" :The "F. AUX" input is selected as the second input source forthe DUAL SOURCE function.4 Press the DUAL SOURCE VOLUME 5 / ∞ to adjust theheadphone listening volume.÷ When the DUAL SOURCE function is ON, the input mode for thesecond input source is fixed at “ANALOG”.The listen mode cannot be changed. 9qLights upNormal playbackAdjusting the soundVOLUME CONTROLVOLMULTI CONTROL %/fi/@/#RCV ModeInput ModeSoundMulti %/fi/@/#MuteActive EQEnterENTERAdjusting the TONE (PCM stereo and analog stereo mode only)1 Press the RCV Mode key on the remote control unit to setit to the receiver control mode.2 Press the Sound key.3 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)to select "TONE CONTROL", and press the ENTER (or theEnter key).4 Use the MULTI CONTROL @ / # (or the Multi @ / # keys) toselect "ON", and press the ENTER (or the Enter key).T O NSEO UCONONDN T R O L5 Use the MULTI CONTROL @ / # (or the Multi @ / #keys) to select "BASS" or "TREBLE".1 "BASS" :Select this to adjust the low frequency range.2 "TREBLE" :Select this to adjust the high frequency range.6 Use the MULTI CONTROL % / fi (or the Multi % / fi keys)to adjust the sound quality.T O NSETOR-UCE2NOBdDNLBTER O L7 Repeat steps 5 and 6 as required.÷ The adjustment mode is displayed for approximately 20seconds.÷ The bass and treble levels are adjustable from -10dB to+10dB in 2 step increments.8 Press the Sound key again to return to the input indication.Lights up"DUAL SRC" indicator