Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

13 ENPreparationsSetting up the systemConnecting video components (S VIDEO)Use the S VIDEO jacks to make connections to video compo-nents with S VIDEO IN/OUT jacks.¶ If you use the S VIDEO jacks to connect your video playbackcomponents, be sure to use the S VIDEO jacks when con-necting your monitor and video recording components.DVDIN VIDEO 2IN MONITOROUTS VIDEOSatellite Receiver(with S VIDEO cord)Monitor TV(with S VIDEO jack)DVD player(with S VIDEO jack)S VIDEO OUT (S VIDEO cord)S VIDEO IN(S VIDEO cord)S VIDEO OUT (S VIDEO cord)(ASSIGNABLE)DIGITAL INCOAX 2(VIDEO 2)COAX 1(DVD)OPT 1(VIDEO 1)OPT 2(AUX)Digital connectionsThe digital in jacks can accept DTS,Dolby Digital,or PCMsignals.Connect components capable of outputting DTS,Dolby Digi-tal or PCM (CD) digital signals.If you have connected a DVD player to the receiver with digitalconnection,be sure to read the "Input mode settings", "Re-assignmentof rear panel jacks" section carefully. 9∞DTS disclaimer clauseWhen playing DTS-encoded discs, excessive noise will be exhib-ited from the analog stereo outputs of the CD or DVD player. Toenjoy DTS Digital Surround™ playback, this unit must be con-nected to the digital output of the CD or DVD player.Connect the analog audio signalsto the AUX jacks.(See "Connecting video compo-nents, audio components ". @)OPTICAL DIGITALOUT (AUDIO)(Optical fiber cord)Component with DTS,Dolby Digital,or PCMOPTICAL DIGITAL OUTCOAXIAL DIGITALOUT (AUDIO)(Coaxial cord)Connect the video signal and ana-log audio signals to the VIDEO 2jacks.(See "Connecting video compo-nents, audio components ". @)CD player or DVD playerOPTICAL DIGITAL OUT (AUDIO)(Optical fiber cord)Satellite Receiver