Kenwood VRS-N8100 Instruction Manual

Also see for VRS-N8100 - AV / Digital Multimedia Receiver: DivX Playback guide Service manual Instruction manual

Contents

26 EN PreparationsNetwork settingsThis unit can be connected to a PC through a LAN circuit.It is required to set up the network before connecting this unit to the PC.1Use the INPUT SELECTOR key (or the Network Server key) toselect “NET SERVER”.When the “NET SERVER” input is selected, the OSD function on theTV screen is activated and detection of the server starts.SEARCHING2Use the MULTI CONTROL @/#(or the Multi @/#keys) toselect “SETUP”, and press the ENTER (or the Enter key) .SETUP RETRYWARNINGCould not detect server.Please chek following item.1. Starting server2. Starting PC application3. Install PC application4. Network connection & setting3Use the MULTI CONTROL %/fi(or the Multi %/fikeys) to select“Network Setup”, and press the ENTER (or the Enter key) .Receiver SetupNetwork SetupExitNET LINK PC SERVER1 Setup Menu4Use the MULTI CONTROL %/fi(or the Multi %/fikeys) to selectthe setting item, and press the ENTER (or the Enter key) .When the “Main” has been selected :MainIPMenu LanguageBack BackVideo OutScreen SaverBlack Level SetupFifmware UpdateEnglishNTSC/CVBS/Y/CON7.5 IRENET LINK Network Setup1 "Main” Setting: ¶This includes the setting of the language of the OSDmenu, setting of the video format used when this unitoutputs the video or photo data in PC that has beeninput through the network, setting of the screen saver,setting of the black level, and updating of the firmware.2 "IP” Setting: ªThis consists of the setting of the IP address.3 "Back”: Select “Back” and press the ENTER (or the Enterkey) to return to the previous display. (The same operation isalso available by pressing the Return key or Multi @ key)÷ While the main setup screen is displayed, the setup mode canbe canceled by pressing the SETUP key (or the Setup key).5Use the MULTI CONTROL %/fi(or the Multi %/fikeys) to select anoption or input the desired numeric or alphabetic characters usingthe numeric keys, and then press the ENTER (or the Enter key).÷ If you made a mistake, press the Clear key and input thecorrect character.When the “Menu Language” has been selected :MainIPNET LINKBackEnglishGermanFrenchSpanishItalianDutchJapaneseMenu LanguageVideo OutScreen SaverBlack Level SetupFifmware UpdateBack BackNetwork Setup6Press the ENTER (or the Enter key) again to return to the mainsetup displays.7Turn off the power to this receiver by pressing the POWER ON/STANDBY (For U.S.A. and Canada) or the ON/STANDBY(For Europe and Australia) key (or the POWER RCVR key).Preparing for playbackSETUPENTERMULTI CONTROL%/fi/@/#SetupPOWER RCVRMulti %/fi/@/#EnterReturnON/STANDBYPOWER ON/STANDBYClearNetwork ServerINPUT SELECTORNumeric keysPreparationTurn on the power to this receiver by pressing thePOWER ON/STANDBY (For U.S.A. and Canada) or theON/STANDBY (For Europe and Australia) key (or thePOWER RCVR key on the remote).