Makita DLS713 Instruction Manual

Also see for DLS713: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

miter angle

2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel DLS713Blade diameter 190 mm (7-1/2")Hole (arbor) diameter 15.88 mm (5/8")Max. kerf thickness of the saw blade 2.2 mm (3/32")Max. Miter angle Left 47° , Right 57°Max. Bevel angle Left 45°, Right 5°No load speed (RPM) 2,200 /minDimensions (L x W x H) 655 mm x 430 mm x 454 mm (25-3/4" x 17" x 17-7/8")Rated voltage D.C. 18 VNet weight 12.2 - 14.3 kg (27.0 - 31.6 lbs)• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860BCharger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Max. Cutting capacities (H x W) with blade 190 mm (7-1/2") in diameter.Miter angle Bevel angle45° (left) 0° 5° (right)0° 25 mm x 300 mm(1" x 11 - 3/4")52 mm x 300 mm(2 - 1/16" x 11 - 3/4")40 mm x 300 mm(1 - 9/16" x 11 - 3/4")----- * 60 mm x 265 mm(Note 1)(2-3/8" x 10-3/8")-----45° (left and right) 25 mm x 212 mm(1" x 8 - 3/8")52 mm x 212 mm(2 - 1/16" x 8 - 3/8")---------- * 60 mm x 185 mm(Note 2)(2-3/8" x 7-1/4")-----57° (right) ----- 52 mm x 163 mm(2 - 1/16" x 6 - 3/8")---------- * 60 mm x 145 mm(Note 3)(2-3/8" x 5-3/4")-----(Note)* mark indicates that a wood facing with the following thickness is used.1: When using a wood facing 20 mm thickness2: When using a wood facing 15 mm thickness3: When using a wood facing 10 mm thickness