NAD T 187 Owner's Manual
Also see for T 187: Owner's manualService manual
                                                       | |
Contents
| 
SOURCE SETUPThere are three sub-menu items under Source Setup. These are SourceSetup (Normal View), Source Setup (Table View) and iPod Setup.SOURCE SETUP (NORMAL VIEW)The Source Setup (Normal View) menu makes it possible to set, allocateor change the following settings.SOURCEThe T 187 is equipped with ten configurable Sources. A particular Sourcecan be enabled or disabled, renamed, assigned analog and digital audiosources, video sources, A/V Presets, Trigger settings among other settings.These settings can be implemented through the following parameters.NOTESource 5 is defaulted to iPod. Change the default setting of Source 5 toiPod via the following procedure (PUPiJ1PE4FUVQwNFOVVOEFSUIFi4PVSDF4FUVQwNFOV"UiJ1PESetup” menu, set “Enabled” to “No”.2 Then, go back to “Source Setup” menu and select “Source Setup (NormalView). (PUP4PVSDFBOETFUi&OBCMFEwUPi:FTwSource 5 can now be configured to any desired settings.ENABLEDOne can enable/disable a Source via this option. This is particularly usefulif only few Sources are used and one directly selects the Source from thefront panel, bypassing unused sources.Select “Yes” to enable the particular Source or “No” to disable the Source.NAMEA new Name maybe assigned to a Source label. For example, if your BDplayer is attached to “Source 1”, it is possible to rename “Source 1” to “BD”.In order to rename the Source label, scroll to the “Name” parameter. Press[S] to go to the first character. Then, press [D/F] to pick through thealphanumeric selections.Press [S] to move to the next character and at the same time save thechanges done on the current character. The name can be as long as twelvecharacters.The new Name will be shown in the VFD as well as on the OSD.ANALOG AUDIOThe T 187 has nine analog audio inputs including 7.1 input. These analoginputs - Audio 1 - 6, Audio Front, Audio MP and 7.1 Input can be variablyassigned to each Source.Scroll to “Analog Audio”, press [S] and then [D/F] to select and assignan analog audio input to the particular Source. There are three choices –Audio, 7.1 Input or Off.When “Audio” is chosen, press [S] and then [D/F] to select and assign thedesired audio input – 1 to 6, Front and MP.Select “7.1 Input” to choose the audio signal fed to “7.1 Channel Input”.If “Off” is selected, no incoming analog audio signal is selected by theparticular Source. Note that when “Analog Audio” is set to “Off”, “Gain” willnot be enabled as an option.NOTEAn incoming digital signal present at the assigned digital input will alwaystake precedence over the assigned analog audio input, even if both arepresent. To maintain the analog audio input for the particular Source, select“Off” at the “Digital Audio” setting of the same “Source” menu.GAINGain adjustment allows all sources to play back at the same volume level soyou don’t need to adjust the volume every time a new source is selected. Itis generally preferable to reduce the level of the loudest source rather thanmaking louder the softer sources.Scroll to “Gain”, press [S] and then [D/ F] to step through the desired levelfrom -12dB to 12dB.Note that when “Analog Audio” is set to “Off”, “Gain” will not be enabled asan option.OPERATIONUSING THE T 187 – SETUP MENU16ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine