NAD T 187 Owner's Manual
Also see for T 187: Owner's manualService manual
                                                       | |
Contents
| 
5 VACUUM FLUORESCENT DISPLAY (VFD)t Displays visual information about the current settings like the activeSource, volume level, listening mode, audio format, applicableRDS/XM/DAB as well as iPod-related display information and otherrelated indicators.t Refer also to the item about DISPLAY SETUP under the USING THET 187 - SETUP MENU segment of the OPERATION section.6 a SOURCE st Toggle through the input selections - Source 1, Source 2, Source 3,Source 4, iPod, Source 7, Front Input, Media Player and Tuner (AM/FM/DAB/XM as applicable). More Sources can be directly recalledupon enabling them at the Setup Menu.t Refer also to the item about SOURCE SETUP under the USING THET 187 - SETUP MENU segment of the OPERATION section.7 VOLUMEt The VOLUME control adjusts the overall loudness of the signal beingfed to the loudspeakers or headphones.t Turn clockwise to increase the volume level; counter clockwise tolower it.8 PHONESt Accepts stereo headphone using a standard 1/4-inch stereo phoneplug (use a suitable adaptor for headphones equipped with asmaller plug).t For headphone listening, the Front speakers must be set to “Large” atthe “Speaker Configuration” of the Speaker Setup item at the SetupMenu; otherwise headphone bass response will be restricted.9 MEMORYt Press this button to store tuned AM, FM and digital radio stations tothe T 187’s 40 preset-memory locations. One can store a mix of anyAM, FM and digital radio stations to the 40 available presets.10 INFOt Show information as supplied by the applicable source.t Toggle [INFO] button to display supplied information.11 AM/FM/DBt Toggle this button to select AM, FM, DAB (230V version only) or XM(120V version only) tuner functions.12 TUNER MODEt In FM mode, this button will toggle between FM Stereo and FMmono.t Select FM Mono (FM stereo and FM Mute icons at VFD areextinguished) for stations that have too much interference or aretoo weak.t In DAB (230V version only) or XM (120V version only) radio, thisbutton enables the digital radio menu in conjunction with theNavigation and Enter buttons.13 LISTEN MODEt Toggle to select through the various Listening mode options.Depending on the format of the currently selected input (digitalor analog, stereo or multichannel), various listening modes areavailable.t Refer also to the item about LISTENING MODE under the USING THET 187 – MAIN MENU segment of the OPERATION section.14 TONEt Press to adjust TREBLE control using the VOLUME knob over a ±10dB range. Press again to adjust BASS control and a third time forDIALOG control.t Refer also to the item about TONE CONTROLS under the USING THET 187 – MAIN MENU segment of the OPERATION section.15 TONE DEFEATt Tone Controls are enabled or disabled by pressing this button. Tonecontrols are bypassed at “Tone Defeat” while at “Tone Active”, thetone controls are enabled again.t Refer also to the item about TONE CONTROLS under the USING THET 187 – MAIN MENU segment of the OPERATION section.16 FRONT INPUT/MPt Toggle button to switch between Front Input and Media Playerinput.17 FRONT INPUT PORTSt Use these convenience jacks for occasional sources such as acamcorder, video game console, any analog audio or HDMI sourcesand composite or S-Video sources.t If your source has a single audio out jack only or is marked “Monooutput”, plug this into the T 187’s Front “R (MONO)” input (item B).t On the other hand, if your source has two output jacks indicative ofstereo output, insert both jacks into the T 187’s corresponding Front“L” (item A) and “R (MONO)” input to achieve stereo output as well.t Connect composite video output source to the front compositevideo input (item C).t Connect S-Video output source to the front S-Video input (item D).t Use the front HDMI input (item E) to connect directly an HDMIoutput source.18 FRONT MP/MIC INPUTt Connect your Media Player’s standard stereo phone jack to thisinput.t This is also same input where the supplied Audyssey microphone isconnected for Audyssey Auto calibration.t Refer also to the item about AUDYSSEY AUTO CALIBRATION underthe USING THE T 187 - SETUP MENU segment of the OPERATIONsection.IDENTIFICATION OF CONTROLSFRONT PANEL7ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine