RESETThe “Reset” option allows the connected (and separately sold) NAD DABAdaptor to be reset to its factory default settings.1 While listening to a DAB broadcast, press [TUNER MODE] button and[ A/S ] to select “Reset”.2 Press [ENTER]. “Reset? No” will be shown in the lower line of the VFD.Press [ A/S ] to switch to “Reset? Yes” option.DAB P--$Reset? Yes %3 To select “Reset? No” or “Reset? Yes”, press [ENTER] while at the desiredoption. Selecting “Reset? Yes” will cause the connected NAD DABAdaptor module to be reset to its factory default settings.INFORMATION SETTINGSWhile listening to a DAB broadcast, the type of information displayed in thelower line of the VFD can be varied. Toggle front panel’s [INFO] button tostep through the following display options:Station Name £^DLS^Channel and Frequency^Ensemble Name^Program Type^Time and Date^Audio Signal information^Error RateSTATION NAMEThe name or identification of the DAB broadcast station is shown. This isthe default display.DLSDynamic Label Segment (DLS) is the scrolling text supplied by thebroadcasting station. It may contain information on music titles or detailsregarding the program or station.CHANNEL AND FREQUENCYThe channel and frequency of the currently tuned DAB broadcast aredisplayed.ENSEMBLE NAMEThe name of the ensemble that is broadcasting the program is displayed.PROGRAM TYPEThis is a description of the type of broadcast supplied by the station, suchas Pop, Rock, Drama and the likes.TIME AND DATEThe current time and date as supplied by the DAB station are displayed.AUDIO SIGNAL INFORMATIONDisplays the bit rate and audio type (stereo, mono or joint stereo)as transmitted by the DAB broadcast provider. These are set by thebroadcaster to suit the type and quality of material being transmitted.ERROR RATEThis displays the digital error rate (0 to 99) of the currently tuned channel -the lower the figure, the better the quality of the received broadcast.OPERATIONLISTENING TO DAB RADIO36ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ