NAD T 187 Owner's Manual
Also see for T 187: Owner's manualService manual
                                                       | |
Contents
| 
The NAD HTR 8 is ready to operate the T 187 right out of the box, but it is really eight remotes in one.Each of the 8 Device Selector keys at the top of the handset can call up a new “page” of remote controlcodes to be transmitted by the remaining keys. You may “teach” codes from any infrared-remotecontrolled component, regardless of brand, to any or all of these.Obviously, the most logical system is that you teach the codes from your DVD player to the [DVD]Device Selector “page,” your television’s codes to the [TV] “page,” and so on, but there is no requiredscheme: You may load any commands to any key on any page (see “Learning Codes From OtherRemotes,” below).The HTR 8 is already preprogrammed with a full complement of commands for the T 187 on its [AMP]Device Selector page, and as well as with library commands to operate most NAD-brand DVD or CDcomponents on the corresponding Device Selector “pages.” These default commands are permanent:Even if you teach the HTR 8 new commands to take their place, the underlying library commandsremain in place and can easily be recalled should you add an NAD component to your system later(see “Delete Mode”, below).Note: For use with the T 187, it should not be necessary to re-program any keys on the HTR 8 [AMP]page. However, in order for the HTR 8 to control your specific NAD-brand components you may needto load one or more different code-libraries (see “Loading Code Libraries,” below).CONTROLLING THE T 187The HTR 8 is divided into two main sections. Eight Device Selector keys at the top—[AMP], [DVD,][TV,] and so on—set the handset’s remaining keys to a “page” of commands to control a particularcomponent. A Device Select key determines only what component the HTR 8 will command; it doesnot perform any function on the A/V Receiver. All of the remaining keys are function keys that can“learn” control codes from virtually any infrared remote controller, allowing you to teach the codes ofyour equipment, regardless of brand, to the HTR 8.However, the HTR 8 is already preprogrammed to operate the T 187. All of the function keys on the[AMP] Device Selector “page” perform T 187 functions. (The HTR 8 can also command many other NADcomponents, from its [DVD,] [CD,] [TUNER,] and [CUSTOM] pages.)It is important to note that certain HTR 8 keys perform different functions depending on the selectedDevice Selector “page.” The color of the Device Selector key-labeling corresponds to the labeling of thefunction keys. Most centrally, the black [AMP] Device Selector “page” corresponds to the black as wellas white input-select labeling above the numeric keys: When the HTR 8’s [AMP] Device Selector pageis active, these keys select the A/V Receiver inputs. Similarly, the purple [DVD] Device Selector “page”corresponds to several purple labels, and so on.OPERATIONUSING THE HTR 8 REMOTE CONTROL39ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine