Call Timer and Call ChargerDuring calls, the call timer displays the call duration on screen, incrementing the time in minutes and seconds until the call is ended.The call timer display must be set to On (see page 36).During calls, the call charger displays the cost of the call on screen, incrementing the cost until the call is ended. The call charger mustbe set to On (see page 36) and supported by your wireless service provider. If it is not supported by your wireless service provider, theoption is disabled (grayed out and cannot be utilized). The time presented is an estimate; not actual time.Using Call Features During a CallThe Call in progress screen displays during a call. The instructions for the following call features begin at the Call In Progress screen.Placing a Call On HoldTo place a received or dialed call on hold from the Call in progress screen:* Press Softkey 2 (Hold) or press (Options Menu) and 1 to place a call on hold from the Phone function Options menu.Press Softkey 2 to retrieve the call.Call WaitingDuring a call, another received call is announced by a beep tone in the earpiece and an incoming message on the screen. To use callwaiting from the Call in progress screen when you hear the beep tone:* Press (Send) to answer the new call and automatically place the current call on hold.Finish the conversation and press (End) to terminate the new call.Press Softkey 2 to take the first call off of hold.You may switch between the calls:* Press (Send) to answer the new call and automatically place the current call on hold.Press Softkey 2 (Hold) to place the new call on hold and go back to the original call, finish the conversation, and press(End) to terminate the call.Press Softkey 2 to take the new call off of hold.Mute A CallTo mute a call using the Phone function Options menu from the Call in progress screen:* Press (Options Menu) and 2 to mute the call. The Phone function Options menu has a box around the mute option number.Press (Options Menu) and 2 to un-mute a muted call.When a call is muted and you accept a received call, mute is automatically turned Off.O The Call Charge is not supported bywireless network service providersin the United States.MENUMENUMENUHoldMuteNew callAdd to conferencePrivate conversationDTMF tonesRecord callDisconnect partyTransfer25
