NEC 515 Manual

Contents

Changing PIN 2 CodeYour phone supports advanced features (e.g. FDN--Fixed Dialing Numbers. See Flag.) that may require a PIN 2 code to be enteredbefore they can be accessed or modified. If the PIN 2 code is entered incorrectly 3 times, you will need to contact your service providerfor assistance.* Press Softkey 1 (Main), 1, 4, 1, and 2 to display the PIN 2 change screen.Key in the current code. You are prompted to input the new code and then to input it again as confirmation. A confirmationscreen displays momentarily and then the Security settings screen displays.Changing Security CodeThe security code is used to unlock the PIM features and browser.* Press Softkey 1 (Main), 1, 4, 1, and 3 to display the Security code screen.Key in the current security code. You are prompted to input the new code and then to input it a second time to confirm. Aconfirmation screen displays momentarily and then the Security settings screen displays.Forgot Your Security CodeIf you forget your security code, contact your AT&T Wireless Service.LocksThe lock settings allow you to lock access to certain phone functions. When a lock setting is enabled, that function remains locked untilthe correct security code is entered. (See Flags.) The default for these settings is unlocked. To change the lock settings:* Press Softkey 1 (Main), 1, 4, and 2 to display the Locks menu.Input the appropriate number of the function lock:1 Auto power-up lock Phone is locked when powered On. Enter your security code to unlock the phone for use.2 SIM PIN1 lock SIM card is locked. Enter the PIN1 to unlock the SIM card and use the phone.3 Phone lock Locks the phone after powered On and displays locked screen. Enter your security code to unlock.4 PIM lock Locks the PIM (Personal Information Manager) applications: Phonebook, Scheduler, and To Do.Enter your security code to unlock PIM applications for use.5 Browser lock Locks the Browser access. Enter your security code to unlock Browser for use.For auto power-up, SIM PIN1, and PIM:* Input 1 to enable the lock (set On) or 2 to disable the lock (set Off) and the security code screen displays.Input your security code and press Softkey 1 (OK). A confirmation screen displays briefly stating that the setting change hasenabled or disabled the function and display returns to the Locks menu.While auto power-up lock is enabled, each time you press and HOLD (On-Off) to power On your wireless phone, you must inputyour security code to begin the powering up process.While SIM PIN1 is enabled (set On), you must input the PIN1.While PIM lock is enabled, any application that attempts to access PIM data requires you to input your security code before the PIMdata is accessed.O With FDN turned On, only the FDNnumbers in the FDN Phonebookmay be dialed and called.O You are allowed three attempts toinput the correct PIN 1 and PIN 2codes. After the third attempt, thephone no longer allows access.Contact your network provider forassistance.42