Release 6.0 110User Guide Chapter 4 NEC Storage Manager2. Click Refresh when Network Setting Tool is started.Figure 4-16: Select a Disk ArrayDisk arrays detected through search are displayed.“not set” is shown for Status for disk arrays for which network settings will be performed for the firsttime.3. Select the target disk array from the list and click Set.If the M series has been installed and IP addresses have been configured, "finished" is shown in theStatus column. For details about information shown for the Status column, see Table 4-3.Table 4-3: Initialization Status of Disk ArrayStatus DescriptionDisplayed information Disk array statusnot set Disk array has just been installedThe disk array is not monitored by NEC Storage Managerbecause the network settings have not been done.IP addresses must be configured by using Network Setting Toolfinished IP addresses have been configuredThe disk array can be monitored by NEC Storage Manager.
