Release 6.0 16User Guide About This DocumentDocument OrganizationTable 3 shows the documentation organization.Dummy carrier Refers to a dedicated dummy carrier, which is used when a diskdrive is not installed.Host bus adapter (HBA) Refers to a Fibre Channel (FC) controller.Network Interface Card (NIC) Refers to an interface control device connected to a client's LANport or an application server's Ethernet port.Controller (CONT) Refers to a controller in a DAC.Power Supply (PS) Refers to a power supply unit.FC cable Refers to a Fibre Channel cable.FC switch Refers to a Fibre Channel switch.Physical Disk (PD) Refers to a physical disk.Table 2: Terms Used (Contd.)Term DescriptionTable 3: Document OrganizationChapter/ Appendix DescriptionChapter 1: "Overview" This chapter describes features, components, and the basicoperation of this disk array system.Chapter 2: “Workflow -Installation to Operation”This chapter explains the flow from the installation to operation ofthis disk array system.Chapter 3: “Installing the DiskArray System”This chapter explains how to install and connect this disk arraysystem.Chapter 4: “NEC StorageManager”This chapter explains NEC Storage Manager used for managingthis disk array system.Chapter 5: “Initializing a DiskArray (FC)”This chapter explains the initialization of this disk array system inan FC environment.Chapter 6: “Initializing a DiskArray (iSCSI)”This chapter explains the initialization of this disk array system inan iSCSI environment.Chapter 8: “Installing OptionalParts”This chapter describes the preparation and installation of theoptional parts of a disk array unit.Chapter 9: “Changes to theConfiguration”This chapter explains how to modify the configuration and thesettings of this disk array system.Chapter 10: “Troubleshooting” This chapter describes possible problems and how to solvethem.Appendix A: "Specifications" This appendix provides the specifications of the disk array.Appendix B: “How toSet/Check Application Server(Windows) (FC/SAS)”This appendix provides the steps you should follow while settingor checking an application server in the Windows environment,when this disk array is configured for the FC connection.
