Release 6.0 310User Guide Appendix B How to Set/Check Application Server (Windows) (FC/SAS)B.1.2 InstallationUse Storage Manager Setup to install the NEC Storage Manager Agent Utility.Storage Manager Setup starts automatically when the NEC Storage Manager Express Setup andUtility CD-ROM is set and then you can perform installation as prompted.The procedure for starting the Storage Manager Setup is:1. Logon as administrator.2. Set the CD-ROM of NEC Storage Manager in an application server.3. The NEC Storage Manager Setup starts automatically. Perform the installation as prompted.The NEC Storage Manager Setup may not start automatically depending on your system configuration,in which case, start the following program contained in the CD-ROM:\INSTALL\WINDOWS\ISMSETUP.EXEIn the case of the environment that a system cannot be restarted, after NEC Storage Manager AgentUtility is installed, put the following operation into effect. Start the Services of the Windows Administrative Tools in Control Panel and start the followingservices. NEC Storage Manager Host Agent NEC Storage Host Register Agent When there are a task scheduler, a job scheduling and a command prompt of Windows, which arealready started, restart them.After the NEC Storage Manager Agent Utility is installed, the system needs tobe restarted to start the NEC Storage Manager host agent service.
