Release 6.0 415User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)CHAP Parameter SettingsIf CHAP authentication will not be used, this step is not necessary.1. Click the CHAP Authentication tab in the iSCSI Initiator Properties screen. The default CHAP parameters are shown under the CHAP Authentication tab. To change these CHAP parameters, click the Configure button.Figure H-18: CHAP Authentication Tab in iSCSI Initiator Properties ScreenFor description of CHAP authentication, refer to Appendix N: "Retrieve InitiatorInformation on Application Servers Registered with iSNS Server".
