Release 6.0 404User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)For a sample connection configuration, see Appendix L: "iSCSI ConnectionConfiguration-Examples".The following shows the positions of the host ports.Figure H-1: Unit with NF53x1-xF21xx (10Gbps iSCSI 2port Controllers)Figure H-2: Unit with NF53x1-xF11xx (1Gbps iSCSI 2port Controllers)The following shows an example of a 10-Gbps iSCSI connection (redundant path configuration incombination with PathManager).To implement the following recommended example, two NICs must be installed in the applicationserver and two 10-Gbps cables are needed to connect the disk array unit and NICs.Use a 10-Gbps cable to connect the NIC to the host port (HP connector) of the disk array unit. (The10-Gbps cable has the same connector shape on both ends.)
