Release 6.0 74User Guide Chapter 3 Installing the Disk Array System8. Mount the unit. Put the front part of the unit on the front part of the rack.Then lift up the unit, put the rear part of the unit on the rail and slide the rail.9. Secure the unit on the front side of the rack.Screw two points on each of the right and left sides of the front side of the unit by using M5 screws.Mounting the unit on the rack is now complete. Mounting a unit on a rack should be implemented by two or morepersons. Take care not to injure your fingers, etc. when moving a unit because itis heavy. Take care not to drop a unit when moving it.Figure 3-9: Securing Unit 1
