Issue 1.0 UNIVERGE SV81002 - 306 Program 22 : Incoming Call SetupDescriptionFor each DID Translation Table, use Program 22-12 : DID Intercept Ring Group todefine the first destination group for DID calls.Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls routeto the first destination group by the following:R Vacant number intercept (vacant number means that no phone is connected, nostation blade is installed, or the extension number is not defined in Program 11-02)R Busy interceptR Ring-no-answer interceptIf the destination is 0, the calls are forwarded to the trunk ring group defined inProgram 22-11 based on the table assigned to the DID trunk. If Programs 22-11-05 and 22-11-06 are set, the priority of transferring is in thisorder:Program 22-11-05 + Program 22-11-06 + Program 22-12.For busy and no-answer calls, if the first and third destinations are programmed,but the second destination is not, the incoming call goes to the third destinationafter the first destination. If the first and second destinations are not defined, butthe third destination is, the call goes directly to the third destination.Program 22 : Incoming Call Setup22-12 : DID Intercept Ring GroupLevel:INInput DataConversion Table Area Number 01~20ItemNo. Day/Night Mode Incoming Group Number Default01 1~8 0 (No Setting)1~100 (Incoming Ring Group)102 (In-Skin/External Voice Mailor VM8000 InMail)1
