UNIVERGE SV8100 Issue 1.0Programming Manual 2 - 361DescriptionUse Program 30-03 : DSS Console Key Assignments to customize the keyassignments for 60-button DSS Consoles. A DSS Console key can have any functionwith up to four digits (e.g., extension number or Service Code).To prevent lamp problems when reassigning DSS Console keys, clearing anextension programmed key before reassigning it is recommended [Enter key to becleared + 00 or 400 (If using WebPro or PC Programming, delete the keyassignments and upload the change to the system before proceeding.)] Withoutclearing an extension key first, the DSS Console may not show the correct lampdisplay, although the DSS function works correctly.If you are programming the system from the extension to which the DSS Console isconnected, either by phone or using the WebPro or PC Program, you may need tounplug the DSS and plug it back in to reset the console lamping.Input DataProgram 30 : DSS/DLS Console Setup30-03 : DSS Console Key AssignmentLevel:SAIndex 1DSS Console Number 01~32Index 2ItemNo. Key Number Function Number Additional Data01 001~114 0~99 (General Functional Level)97 = Door Box Access key(additional data: 1~8 Door Box No.)4 00 ~ 4 99 (Appearance FunctionalLevel)Refer to Function NumberList on the following pages.
