UNIVERGE SV8100 Issue 1.0Programming Manual 2 - 407DescriptionUse Program 35-02 : SMDR Output Options to set the SMDR (Station MessageDetail Recording) output options for each of the eight SMDR ports. Refer to thefollowing chart for a description of each option, its range and default setting.Program 35 : SMDR Account Code Setup35-02 : SMDR Output OptionsLevel:INInput DataSMDR Port Number 1~8ItemNo. Item Input Data Default01 Toll Restricted CallSMDR can include or exclude calls blocked byToll Restriction.0 = Not Displayed1 = Displayed102 PBX CallsWhen the system is behind a PBX, SMDR caninclude all calls or just calls dialed using thePBX trunk access code.0 = Not Displayed1 = Displayed103 Trunk Number or NameSelect whether the system should display thetrunk name (0) or the number (1) on SMDRreports. If this option is set to 1, Program35-02-14 must be set to 0.0 = Name1 = Number104 Summary (Daily)Set this option to (1) to have the SMDR reportprovide a daily summary (at midnight everynight).0 = Not Displayed1 = Displayed105 Summary (Weekly)Set this option to (1) to have the SMDR reportprovide a weekly summary (every Saturday atmidnight).0 = Not Displayed1 = Displayed106 Summary (Monthly)Set this option to (1) to have the SMDR reportprovide a monthly summary (at midnight on thelast day of the month).0 = Not Displayed1 = Displayed1
