UNIVERGE SV8100 Issue 1.0Programming Manual 2 - 565DescriptionUse Program 51-03 : NetLink Internet Protocol Address List Setting to set the IPaddress of the NetLink system.ConditionsP The system seeks Primary system based on this list.P When there is no Primary System yet, or Fail Over occurs, Node List is referred toestablish new link.P This setting is necessary when PRG 51-01-03 is 0, or PRG 51-05-02 is other than0. Once the system connects to the Primary System, this setting is updated by thePrimary system when PRG 51-13-01 is on. So, enter IP address of the systemswhich may become Primary at least.Feature Cross ReferenceNoneProgram 51 : NetLink Service51-03 : NetLink Internet Protocol Address List SettingLevel:INInput DataList ID 1~50ItemNo. Item Input Data Default01 Internet Protocol Address ListThe system seeks the Primary system based onthis list.When there is no Primary system yet, or FailOver occurs, Node List is referred to establishnew link. This setting is necessary when PRG51-01-03 is 0, or PRG 51-05-02 is other than 0.Once the system connects to the PrimarySystem, this setting is updated by the Primarysystem when PRG 51-13-01 is On. So, enter IPaddress of the systems which may becomePrimary at least.0.0.0.0 ~ 126.255.255.254128.0.0.1 ~ 191.255.255.254192.0.0.1 ~ 223.255.255.2540.0.0.0
