Issue 1.0 UNIVERGE SV81002 - 466 Program 44 : ARS/F-Route SetupDescriptionUse Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set thePre-Transaction Table for selecting ARS/F-Route.Program 44 : ARS/F-Route Setup44-02 : Dial Analysis Table for ARS/F-Route AccessLevel:INInput DataDial Analysis Table Number 1~120ItemNo. Item Input Data Default01 DialSet the number of digits to be analyzed by thesystem for ARS routing.Up to eight digits(Use line key 1 for a Don’tCare digit, @)NoSetting02 Service TypeP Service Type 1 (Extension Number)The number goes to an extension afterdeleting the front digit(s).Additional DataAssign the digit(s) to be deleted on top of thenumber for extension number usage. At leastone digit must be deleted.P Service Type 2 (ARS/F-Route)The number is controlled by ARS/F-Routetable.Additional Data:If the ARS/F-Route Time Schedule is notused, assign the ARS/F-Route table numberfor Program 44-05.If the ARS/F-Route Time Schedule is used,assign the ARS/F-Route selection number forProgram 44-04.P Service Type 3 (Dial Extension AnalyzeTable)The total length of the number exceeds morethan 8 digits.Additional Data:Assign the Dial Extension Analysis Tablenumber to be used in Program 44-03.0 = No setting (None)1 = Extension Call (Own)2 = ARS/F-Route Table(F-Route)3 = Dial Extension AnalyzeTable (Option)0
