→ The Section takes its new place. On your controller in Section mode, you can now selectthis Section via the pad corresponding to its new location.Moving a Section using the ControllerTo move a Section using your controller:1. Press SHIFT + SCENE to access Arranger view (if you are not already in the Arrangerview).2. Press and hold SCENE to enter Section mode (you can pin it by pressing CONTROL).3. Press SHIFT + Left/Right Arrow buttons to select the Section bank containing the Sectionyou want to move.4. Press the pad of the Section you want to move.5. Press the Left Arrow button to select the POSITION parameter at the bottom of the dis-play.6. Turn the Control encoder to move the selected Section to another position in your arrange-ment.→ The Section takes its new place. In Section mode you can now select this Section via thepad corresponding to its new location.13.3.6 Adjusting the Length of a SectionHere are a few rules on how Sections, Scenes and Patterns are displayed within the Arranger:By default the length of a Section is automatically set to the longest Pattern used within thereferenced Scene (Auto Length), unless the length of the Section is manually set to a specificbar range (Manual Length).Working with the ArrangerUsing Arranger ViewMASCHINE MIKRO - Manual - 734
