You must define at least one MIDI input device in the Devices section of the MIDI pageto enable MASCHINE to sync.When Slave (Receive Clock) is selected, the Play button in the MASCHINE Header and thePLAY button on your controller are deactivated.If you want to configure MASCHINE to react to other MIDI messages than MIDI Clock,in particular if you want to control MASCHINE notes and parameters via MIDI, pleaserefer to section ↑8.2, Using MIDI Control and Host Automation, where this is describedin detail.2.7.3 Send MIDI ClockIf MASCHINE is running as a stand-alone application, it can also send a MIDI Clock signal toany device that is capable of receiving MIDI Clock. This could be hardware such as a drummachine, another groovebox, or even another software sequencer.If you use MASCHINE as a plug-in, it cannot send any MIDI Clock signal. See section↑2.5, Stand-Alone and Plug-in Mode for more information on using MASCHINE as aplug-in.To configure MASCHINE to receive MIDI Clock from an external device:1. Select Preferences entry from the File menu.2. Select the MIDI page.3. In the Sync section select Master (Send Clock) from the menu.Basic ConceptsIntegrating MASCHINE into Your MIDI SetupMASCHINE MIKRO - Manual - 96
