Enabling Clients to Access ImagesTFTP & DHCP Server Configuration 61DHCP ServerConfigurationConfigure your DHCP server so that it serves the file mPXELdr.binto the clients. (Refer to the DHCP , TFTP and PXE documentationfor details.)If you use Microsoft Windows DHCP Server on a Windows 2000/2003 server, refer to the appendix “Configuring the DHCP Server”on page 297.The DHCP/BOOTP next-server entry must be set to the TFTPserver’s IP address.Refer to the appendix “DHCP Reference” on page 317 for informa-tion on how clients locate the Neoware Image Manager server, andthe DHCP options used.Note: The freeware TFTPD32 (http://www.jounin.net) embeds asimple DHCP server that has been successfully tested with NeowareImage Manager. TFTPD32 should then provide the TFTP andDHCP services on the same computer. If the computer that runsTFTP and DHCP services also runs NVDD service (Neoware ImageManager Server module), there is no need to configure extra DHCPoptions.
