Nilfisk-Advance SC6000 36C Service Manual

Also see for SC6000 1050D: Instructions for use

Contents

Nilfisk-Advance SC6000 36C Service Manual Manual pdf 123 page image

123Service Manual – SC6000 38 - Squeegee SystemFront Squeegee Blade Reversal or Replacement1 Remove the suction hose from the squeegeebody and move the hose off to the side (A)2 Loosen the two thumbscrews (B) that securethe squeegee assembly to the machine, andremove the squeegee assembly3 Loosen the clamping thumbscrew (E) thatcompresses the retaining strap (F) againstthe squeegee blade (G) and squeegee body4 Lift the center of the retaining strap (F)away from the tabs on the squeegee body,and slide it out from below5 Lift the front squeegee blade (G) off thesqueegee body• The squeegee can be rotated and/or flipped3 times to expose a new edge (4 edges total)to the lower-front If all 4 edges are worn,replace the squeegee blade with a new one6 To replace the blade, align the slots in theblade with the tabs on the squeegee body7 Reinstall the retaining strap (F) in thereverse process from removing it8 Tighten the thumbscrews (E) to press theretainer against the squeegee blade9 Reinstall the squeegee assembly and performthe Squeegee Height and Tilt Adjustmentdescribed on page 119AABCDEFG