135Service Manual – SC6000 90 - Options and AccessoriesDust GuardRequires Main Controller configuration: YesAvailable only when also equipped with the SideSweep option This adds a misting nozzle in front ofthe side broom, a solenoid valve on the frame abovethe side broom, and a fluid pump at the rear of themachine. The inlet to the fluid pump connects tothe moulded solution tube on the scrub deck Onlyone option pump can be installed at a time, so thisoption is not compatible with the wash hose optionDust Guard is covered in the “34 - Scrub System,Cylindrical” on page 103BeaconRequires Main Controller configuration: NoThe beacon is located on the crossbar behind the operator’s seat The beacon is active whenever the machineis powered on The beacon itself is not covered in the manual, but accessing the wiring connector is shown inthe removal procedure for the “Vacuum Motor” on page 130Weight KitRequires Main Controller configuration: NoThe weight kit mounts inside the lower steering column and provides additional weight over the drive wheelfor improved ramp climbing capability The weight kit is not covered in the service manualFoot GuardRequires Main Controller configuration: NoThe foot guard mounts under the foot pedal, and wraps around the pedal to protect the operator’s foot fromoverhangin obstructions The foot guard is not covered in the service manualMop HolderRequires Main Controller configuration: NoThe mop holder is a bracket that mounts to the crossbar or overhead guard The mop holder is not covered inthe service manualSolenoidSupplyHose
