108/11319. FAX CLASS 2 RESPONSESBelow is a list of possible responses that a fax can give to the DTE during a Class 2 fax call.They are defined in SP-2388 /7/.Response Description+FCIG: report a CIG frame received from remote, example: +FCIG:î +358105056888î+FCFR indicate that CFR (Confirmation to Receive) frame has been received+FCON indicate a facsimile connection, issued in the beginning of Phase B+FCSI: report a CSI frame received from remote, example: +FCSI:î +358105056888î+FDCS: report a DCS frame (sent or received), example: +FDCS:0,3,0,2,0,0,0,1+FDIS: report a DIS frame received from remote, example: +FDIS:1,3,0,2,3,1,0,3+FDTC: report a DTC frame received from remote, example: +FDTC:1,3,0,2,3,1,0,3+FET: report post message command in a receiving session, example (EOP): +FET:2+FHNG: report call termination status response, example (normal termination): +FHNG:0+FHR: report a received HDLC frame, only used when +FBUG parameter sets to 1+FHT: report a transmitted HDLC frame, only used when +FBUG parameter sets to 1+FNSC: report an NSC frame received from remote+FNSF: report an NSF frame received from remote+FNSS: report an NSS frame received from remote+FPOLL an indication of the remote having indicated that it has a document for polling+FPTS: page transfer status response as indicated by the receiver, be it our end or the other+FTSI: report a TSI frame received from remote, example: +FTSI:î +358105056888î+FVOICE an indication of the session having been suspended through a procedure interruption
