19/1133.9 TYPE APPROVAL AND EMC TESTINGThe following statements reflect the current understanding of Nokia on type approval andelectro-magnetic compatibility (EMC) testing. Please find out the testing status of the chosenapplication with the appropriate authorities.3.9.1 GSMUsing Nokia D211 as a terminal adapter (TA) to a GSM network for data transmission inmost host devices is covered by the type approval of the Nokia D211 if the interface betweenthe host and the Nokia D211 is as specified in this document.3.9.2 WLANThe Nokia D211 operates at 2.4 -2.4835 GHz. The use of the frequency band is notharmonized throughout European Community or globally. Consult local authorities on theregulations concerning the use of the Nokia D211.Using the Nokia D211 as a terminal adapter for data transmission in most host devices iscovered by the type approval of the Nokia D211 if the interface between the host and theNokia D211 is as specified in this document. National deviations, however, may exist.3.9.3 Electromagnetic compatibility (inside Europe)For electromagnetic compatibility (EMC) the Nokia D211 is tested according to the standardsEN 301 489-7 /21/ and EN 301 489-17 /22/ as a ëRadio and ancillary equipment for fixed use(base station equipment)í. The standards refer to the standard EN 301 489-1 /20/. Spuriousemission requirements for WLAN are specified in the standard EN 300 328-2 /18/, whichrefers to the standard EN 300 328-1 /17/.If the host interface is designed for the Nokia D211 only, the combination of the host and theNokia D211 has to fulfil the requirements of the standards EN 301 489-7, EN 301 489-17 andEN 300 328-2. The combination of the host and the Nokia D211 has to fulfil all relevantEuropean directives.Note: The Nokia D211 is tested against the requirements relating to residential,commercial and light industrial environment. No vehicular or automotiverequirements are applied.3.9.4 Electrical safety (inside Europe)The Nokia D211 is tested for electrical safety according to the standard EN 60950 /23/. TheNokia D211 is a Class III product, which means that the Nokia D211 has to be supplied fromsafety extra-low voltage (SELV) circuits according to EN 60950.
