60/1130 voice (default) ñ Dummy code included for compatibility reasons1 alternating voice/fax, voice first (teleservice 61) ñ Dummy code included forcompatibility reasons2 fax (teleservice 62)4 data5 alternating voice/fax, fax first (teleservice 61) ñ Dummy code included forcompatibility reasons8.3.10 +CHSR HSCSD parameters reportCommand Response Defaultset +CHSR= 0read +CHSR? +CHSR: test +CHSR=? +CHSR: (0-1)Mandatory when HSCSD is implemented. 07.07 section 6.16.8.3.11 +CHSD HSCSD device parametersCommand Response +cme errorexecute +CHSD +CHSD: ,,,, xtest +CHSD=? 6,3,2,4,12Mandatory when HSCSD operation is implemented. 07.07 section 6.12.Parameters:: integer type; multislot class: integer type; maximum number of receive timeslots that ME can use: integer type; maximum number of transmit timeslots that ME can use: integer type; total number of receive and transmit timeslots that ME can use atthe same time (per TDMA frame). The following applies in a HSCSD call: 1 <=(receive slots) + (transmit slots) <= is a sum of integers, each representing a supported channel coding (e.g. value12 indicates that 9.6k and 14.4k channel codings are supported):1 4.8k full rate data traffic channel4 9.6k full rate data traffic channel8 14.4k full rate data traffic channel8.3.12 +CHSN HSCSD non-transparent call configurationCommand Response Defaultset +CHSN=,,,0,0,0,0read +CHSN? +CHSN: ,,,test +CHSN=? +CHSN: (list of supported s), (list ofsupported s),(list of supported s,(list of supported s)(0-4,6), (0-3), (0-3), (0,4,8,12)Mandatory when non-transparent HSCSD calls are implemented.Parameters
