58/1137 9600 bps (V.32)12 9600 bps (V.34)14 14400 bps (V.34)15 19200 bps (V.34)16 28800 bps (V.34)34 1200 bps (V.120)36 2400 bps (V.120)38 4800 bps (V.120)39 9600 bps (V.120)43 14400 bps (V.120)47 19200 bps (V.120)48 28800 bps (V.120)49 38400 bps (V.120)50 48000 bps (V.120)51 56000 bps (V.120)65 300 bps (V.110)66 1200 bps (V.110)68 2400 bps (V.110 or X.31 flag stuffing)70 4800 bps (V.110 or X.31 flag stuffing)71 9600 bps (V.110 or X.31 flag stuffing)75 14400 bps (V.110 or X.31 flag stuffing)79 19200 bps (V.110 or X.31 flag stuffing)80 28800 bps (V.110 or X.31 flag stuffing)81 38400 bps (V.110 or X.31 flag stuffing):0 data circuit asynchronous (UDI or 3.1 kHz modem)2 PAD Access (asynchronous) (UDI):1 non-transparent8.3.5 +CRLP Radio link protocolCommand Response Defaultset +CRLP=,,,[,,]RLP version 0 or 1 set:61,61,48,6RLP version 2 defaultsdepend on +CHSN selectionread +CRLP? +CRLP: ,,,[+CRLP: ,,,,2,]test +CRLP=? +CRLP: (0-61),(0-61),(39-255),(1-255)[+CRLP: (0-n),(0-n),(39-255),(1-255),2,(3-255)]Mandatory when non-transparent data implemented. 07.07 section 6.8. Command/responseparameters in brackets are present when the product implements RLP version 2 (multislotRLP). Note that 0 is default for and each RLP version has its own parameter setstored in TA memory (with the exception of versions 0 and 1 which use the same set). Rangeof version 2 window size parameters depend on +CHSN selection (selected HSCSD speed).
