InstallationA 1-14E 2000 Nordson CorporationAll rights reserved41-3000VIssued 5/00A3EN-04-[3V-A-AAXP]-125. Remove the O-ring plug from the hose port where you plan to installthe first hose. Keep the O-ring plug for later use during maintenanceand servicing procedures.6. See Figure A 1-9. Take one of the hose-connector fittings that wasshipped with the unit and apply an anti-seize compound to thethreads. Thread the fitting into the hose port.4103398AFig. A 1-9 Threading the Hose Connector Fitting into the Hose Port7. Tighten the fitting with a wrench.8. Connect a hose to the gun fitting. Use two wrenches to tighten thehose as shown in Figure A 1-8.9. Install any additional hoses by repeating steps 4--8. Be sure toconnect a second hose next to the first, working from right to left.Depending upon your unit, you can connect a maximum of four or sixhoses this way.Installing Hoses (contd.)