Nordson 3000V Series Manual

Contents

InstallationA 1-40E 2000 Nordson CorporationAll rights reserved41-3000VIssued 5/00A3EN-04-[3V-A-AAXP]-12Table A 1-11 Summary of Features to CustomizeControl Area Features to CustomizeSYSTEM SETTINGS From SYSTEM SETTINGS you can customize the following features, which are explainedin more detail in Table A 1-12: Password Enable System-Ready Time Delay period Overtemperature Setpoint Celsius or Fahrenheit display Global Temperature Band setting Individual Temperature Bands setting Sequential or Simultaneous Startup Display Heater Proportioning Warning or Power notification Ready or Pump notification Auto-Energize Pump (piston pump units only) Auto-Energize Pump Temperature setting (piston pump units only) Auto-Energize Heaters Auto-Energize Pattern Control Time with Heaters OnTEMPERATURE SETPOINT Temperature: This feature sets the temperature that a zone will maintainduring normal operation.STANDBY Temperature: This feature sets the desired temperature to which a zone willbe reduced when the system is in the standby mode.CLOCK SET TIME: This feature keeps the current day and time. The clock must be on beforeyou can use the HEATERS ON, HEATERS OFF, ENTER STANDBY, and EXIT STANDBYfeatures.ENTER STANDBY and EXIT STANDBY: This feature sets the time that you want thesystem to automatically enter and exit the standby mode.HEATERS ON and HEATERS OFF: This feature sets the time that you want heaters toautomatically turn on and off.PATTERNCONTROLOUTPUT 1: This feature allows you to control how output 1 applies a pattern.OUTPUT 2: This feature allows you to control how output 2 applies a pattern.LINE SPEED: This feature allows you to enter your line speed so the pattern controlleraccurately applies pattern sets to your product.STORE: This feature allows you to store as many as 99 pattern sets in the controller’smemory. Once a pattern set is stored, it can be used any time.USE: This feature allows you to use a stored pattern set.Programming SystemControls (contd.)