176 MaintenanceTo conduct conference OA&M for an ICB card, connect a terminal to theRS-232 port or the Ethernet connector associated with that ICB card. Themaintenance terminal connects to each ICB card through an IPE moduleI/O panel connector or through the Ethernet adapter card.The Ethernet adapter provides two options:• direct terminal connection or modem connection to DB-9 connector• Ethernet connection, where multiple terminals connected to the Ethernetcan access an ICB cardFor the Ethernet connection option, an IP address assigned to the ICB cardis required to enable access to the ICB through the LAN.Figure 82 "ICB card in the Intelligent Peripheral Equipment Module" (page176) shows an Meridian system with two IPE modules. This exampleshows each IPE module with one ICB card. Each ICB card connects toits maintenance terminal through the associated IPE module I/O panelconnector. Use one terminal for all ICB cards by moving the terminal cableto the I/O panel connector of the card to be accessed.Figure 82ICB card in the Intelligent Peripheral Equipment ModuleNortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
