74 Installation and configuration• Gateway address - Is in the XXX.XXX.XXX.XXX format, whereevery token is in the range 0-255.8 Enter S to save the parameters.9 Exit the CLI and proceed to Procedure 14 "Access the administrationBUI" (page 74). All other card configuration is performed from theBUI.—End—Procedure 14Access the administration BUIStep Action1 Check the installation by doing the following:a. Run a browser, either Netscape or Microsoft Internet Explorer.b. In the location field, enter:http:// IP address>c. Login as an administrator. The default ID and password areadmin and carriage return (enter key).d. Proceed with the installation using the Installation Wizard (seebelow).—End—Note: If changes to IP addresses are to be completed to previouslyinstalled ICB4 cards that are currently configured for Dual CardConferences, the card must be changed to Single Card Mode via the BUIprior to making changes to the IP addresses of the cards.Refer to Figure28 "Installation Wizard: Step 1 - Basic Card Settings window" (page 76)ICB Installation WizardOverviewThe ICB Installation Wizard provides an easy method for configuringnew systems. Only a user who logs in as an administrator can use theInstallation Wizard. An administrator accesses the Installation Wizard byclicking on the Install Wizard link on the BUI’s ICB Dashboard. For moreinformation about accessing this tool, see, "Administration BUI" (page 110).Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
