Upgrade procedures 2293 Select the source of the new firmware version. If the source is anFTP server, specify the IP address, path, login user name, andpassword.4 Click Upgrade & Restart.—End—After upgrading the firmware, you must publish the new upgraded ICB formthat comes with the firmware. See Procedure 34 "Upgrading the ICB formin the Organizational Forms Library" (page 179).The top-right corner of the Firmware Upgrade window shows the currenthardware and firmware versions. The firmware version takes the form of"4.xx", where 4 is the ICB release and xx is the firmware version number.The first step is to specify the upgrade source by clicking on one of theradio buttons. Depending on the source selected, the following proceduresdescribe how to perform the firmware upgrade.Procedure 46Firmware upgrade from ICB card upper socketStep Action1 Click on the secondary PCMCIA device radio button.2 Insert the PCMCIA disk in the upper socket of the ICB card.3 Click on the Upgrade & Restart button.The ICB copies the files from the upper socket and performs arestart. When the restart is complete, the current BUI session is lost.Login again as an administrator. When returning to this window,the new firmware version should appear in the top-right corner ofthe window.—End—Procedure 47Firmware upgrade using FTPStep Action1 Click on the FTP Server radio button.2 Enter the FTP parameters in the fields the window provides asfollows:Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
