Diagnostic tools 183Table 41 "Commands to enable/disable ICB channels" (page 183) lists someof the commands used to control the ICB status and functions.Table 41Commands to enable/disable ICB channelsCommand Operation performedLD 32DISC/ENLC Disable/Enable specified card.DISU/ENLU Disable/Enable specified channel.LOOP Performs a network memory test, continuity test, andsignaling test on the specified loop.STAT Get status of specified card/channel.LD 30UNTT Performs self-test on the ICB.CS 2100/Meridian SL-100 diagnostic commandsEach card performs diagnostic tests as part of the daily routines. Diagnostictests can be activated from the MAP terminal on the CS 2100/MeridianSL-100. The ICB card appears as an extended digital line card to thesystem. For the diagnostic routine to pass in the LTP level of the MAPterminal, the feature Communicator must be assigned to key 1 of the LEN.Table 42 "CS 2100/Meridian SL-100 commands to enable/disable ICBchannels" (page 183) lists commands used to control the ICB status andfunctions.Table 42CS 2100/Meridian SL-100 commands to enable/disable ICB channelsCommand Operation performedIPE MAP LevelBsy Card x/ RTS card x Disable/enable specified card.Tst Perform a network memory test, continuity test, and signaling teston the specified loop.QueryPM Inven Card x Get status of specified card.LTP MAP LevelBsy Make the LEN or DN busy.Bsy INB Take the port out of service. The system does not generate alarms.RTS Bring the ICB port in-service.Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
