54 Installation and configurationTable 9 "Sample dialing plan for a 62-port dual-card configuration" (page 54)shows a sample dialing plan for a 62-port dual-card configuration.Table 9Sample dialing plan for a 62-port dual-card configurationDescription of DNsDNs for theprimary cardDNs for thesecondary card Configure in...ACD DN 7000 8000 LD 23Pair DNs forsingle-cardconferences7001-7018 (NCFW =7000 in LD 23)8001-8018 (NCFW =8000 in LD 23)LD 23TUI DNs 7019 (NCFW = 7000) 8019 (NCFW = 8000) LD 23Chairperson DNs 7020 (NCFW = 7000) LD 23Transfer DN N/A 8021 (NCFW = 8000) LD 23Link DN N/A 8022 (NCFW = 8000) LD 23Main DN 7021 (TRGT = 70000)7021 (TRGT = 80002)LD 23Note: Because of the number and variety of DNs programmed for thedual-card setup, Nortel Networks recommends creating a dialing planchart similar to Table 9 "Sample dialing plan for a 62-port dual-cardconfiguration" (page 54). Refer to this chart when configuring theprimary and secondary card attributes, including the dual-card settings,in the administration BUI.Finally, configure each port on the primary and secondary cards as a digitalset. See Table 7 "LD 11 - Configure ICB ports as digital sets" (page 49).Assign CDR dataIf charge account is used for CDR billing, then configure the feature ChargeAccount for CDR billing. Remember to define Key 9 on all ICB key ports.See Table 10 "LD 15 - Define the charge account for CDR data" (page 54).Table 10LD 15 - Define the charge account for CDR dataPrompt Response DescriptionREQ CHG Change customer data.TYPE CDR_DATA CDR data block.CHLN 23 Set the charge account number length to 23.Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
