Upgrade procedures 233above, took place, this is reflected in the DN table. If the directaccess dialing mode is used, only nine DNs appear.4 Click the Submit & Continue button.5 The system displays Step 4 of the Installation Wizard (see "Step 4 -Dual Card Meetings" (page 80)).If a DN pair was automatically deleted as described above, itappears in the fields "Conference access number" and "Chairpersonnumber in primary card." You can change these numbers; they mustbe configured in the Meridian switch as well.Fill in all the fields as described in the installation instructions, andclick the Finish button.6 Logout of this card and proceed with the Meridian switchconfiguration change (see Procedure 51 "Meridian switchconfiguration changes" (page 233)).—End—Procedure 51Meridian switch configuration changesStep Action1 If a DN pair was deleted from the secondary or primary card, deleteit from the switch datafill.2 Configure the DNs defined in the Installation Wizard Step 4 windowof the primary ICB. Define them as described in the dual-cardICB installation instructions (for the Meridian 1 or CS 1000 see"Configure DNs for a dual-card conference" (page 52); for the CS2100 or Meridian SL-100 see "Dual-card configuration" (page 60)).—End—Nortel Communication Server 1000/Communication Server 2100 Solution/Meridian SL-100Nortel Integrated Conference Bridge: Service Implementation FundamentalsNN43001-558/555-4001-135 01.02 StandardICB Release 4 20 June 2007Copyright © 2007, Nortel Networks.
