138NN42020-105 MCS 5100 Release 4.0 Standard 01.06 November 2007The Session Manager is given information about what to query to find the correctgateway to send SIP calls to the voice-mail server when calls are routed to voicemail. An SMDI TELNET session is configured to allow the Session Manager tosend call setup information using a SMDI Call Detail Message to receive SMDIMWI messages.Adding a trunk-based voice-mail serverTo add a trunk-based voice-mail server1 Select Voice Mail > Add Trunk VMS.The Add a new Trunk Voicemail Server window appears.2 Enter parameter information and values for the trunk-based voice-mail serveras described in the following table.Parameter Type Range Default DescriptionName String (200) Up to 200charactersNone The name that identifies thetrunk-based voice-mail server.Type Select fromdrop downlistPRI_TRUNKCAS_TRUNKPRI_TRUNK A specification of whether thevoice mail Gateway is PRI or CAS.Client contact String (400) Up to 400charactersVoice mail The field used to route voice mail.In most cases, you use the default(voice mail). If you require adifferent client contact, contactyour support representative.App.Svr.Address String(Long nameof theSessionManager))Long name ofthe SessionManagerServerHome. Withthis default, eachSession Managerignores this fieldand forward SIPrequests to thevoice-mail serverinstead offorwarding them toa home ApplicationServer.Specifies that the SessionManager hosts the voice-mailserver being provisioned. Thisparameter is used in an N+1environment. All SessionManagers (that are not the homeSession Manager) forwardrequests destined to voice mail tothe address specified in this field.Note: From the drop-down list,you select a Session Managerconfigured on the system.
