229Provisioning Client User Guide• The gateway’s IP address is 192.12.12.12.• The trunk group assigned to domain abc.com is pstn_trunk_group for facingwith the PSTN network.This example uses a gateway route to terminate 9+10 digits to PSTN subscribers.To create a gateway, gateway route, and trunk group1 Select Services Nodes > Add Node and use the data to access the gatewayyou wish to create.2 Click Add.3 Select Service nodes > List Node.4 Click the Domains link of the node name.5 From the Assign Domains page, select the domain you wish to associate withfrom the Available Domains drop-down list.6 Click Add.The domain appears in the Assigned Domains field.7 Select Service Nodes > Add Logical Entity to provision a gateway route fora domain (for example, Route to abc.com). Select the trunk group from theParms drop down menu option.8 Click Add Entity.Create the telephony routesUsing the dial plan defined earlier, you can now create the telephony routes. First,create the private routes so that subscribers in subdomain rich.abc.com can reacheach other using 5+xxxx digits.Using the subscriber information in the following table, a lobby phone (user =lobby) can reach the user named paul by dialing 51000.Subscriber Alias Subdomain CoSlobby 9726850000 rich.abc.com lobby_dial_planpaul 9726851000 rich.abc.com local_dial_plan
