Chapter 54 Call security: Restriction filters 435Networking Configuration GuideThe default values for restriction filters are based on country profile. Refer to “Default filters” onpage 436 and “Default filters for other common profiles” on page 437.Adding a restriction filter and exceptionsTo add a restriction filter1 On the Filters table, select the number for the Restriction Filter where you want to add filters.2 Under the Restrictions table, click Add.3 Enter the digits that you want to restrict if they precede a dial string going out of the system.4 Click OK.5 Repeat steps 3 and 4 for all filters you want to add.6 If you need to apply overrides to a filter, on the Restricted table, click the restricted digit towhich you want to add overrides.7 Under the Exceptions table, click Add.8 Enter the number that you want to allow when this restriction is in effect.9 Repeat steps 7 and 8 for all overrides you want to add to this filter.10 Repeat steps 6 to 9 for all the filters to which you want to add overrides.Delete 1. On the Filters table, select the filter where you want to delete information.2. On the Restrictions table, select one or more restrictions to delete.3. Click Delete.4. Click OK.Exceptions tableDigits For each restriction digit, enter any numbers that should dialout, despite the restriction.Note: The wildcard A (Any) can be used as part of thedialstring.Actions:Add Refer to “Adding a restriction filter and exceptions” on page 435Delete 1. On the Filters table, select the filter where you want to delete information.2. On the Restrictions table, select the restriction filter that has the exception that youwant to delete.3. On the Exceptions table, click one or more of the exceptions.4. Under the Exceptions table, click Delete.5. Click OK.Table 89 Restriction filters and exceptions fields (Sheet 2 of 2)Attribute Value Description
